Sales, Marketing and Advertising
Limited Company "Torgovy Dom "Extraplast"
634059, Tomsk, Raketnaya St., 17 Phones: (382-2) 76-86-09, 65-98-39 fax: (382-2) 76-85-93 E-mail: scredit@mail.tomsknet.ru
ABOUT
US
The Limited Partnership "Plastics Production
Plant" (former Shevchenco Plant of Plastics
and then Stock Company "AkPo") is a
largest multi-unit enterprise, on the UIS and
Europe territory, producing polystyrene.
The plant is located 12 km to East of Aktau city
on the Caspian Sea shore of the Kazakhstan Republic.
The Aktau city (before 1992 Shevchenco) is a large
industry center of Western Kazakhstan. It is connected
by rail-road, air, automobile and water transport
with other regions of Kazakhstan and former USSR.
The plant was built in 1976-1980 on a base of
complete import equipment. 2001 is the year of
the second birth of the plant, when the Trade
House "Extraplast" bought it by an auction
and resumed the polystyrene production.
Manufacturing capacities of the plant make it
able to produce:
Polystyrenes of different purposes more than 30
grades: of general purpose, EPS, HIPS
Polysulfones,
ABS-plastics,
Consumer goods.
High production quality is based on the use of
modern processes from world famous firms - Emejota
(USA), Rhone Phojil (France) and the latest scientific
results of leading Russian research institutes.
Our production quality has been marked with many
medals and diplomas of international exhibitions,
fairs and competitions.
The last rewards are - Silver Medal and Diploma
of II degree for the General Purpose Polystyrene
PSM 115 - have been obtained on the 3 International
Exhibition "Industry of Plastics" that
took place in Moscow on February 25-28. The rewards
have been conquered in the competition "The
best polymeric materials and articles made of
them 2002".
The Limited Company "TH Extraplast"
effects production sale, marketing, advertising.
Our production may be dispatched from the warehouse
of the Aktau city and also from a wide dealer
network whose warehouses are located in many Russian
cities : Nizhniy Novgorod, Zlatoust, Moscow region,
Novosibrsk, Tomsk.
We attentively follow the market of plastics doing
all our best to improve our production quality
according to modern requirements. We are open
to a mutual benefit collaboration and appreciate
stable business contacts.
PRODUCTION
OF PLASTYROL
The general purpose polystyrene is produced by continuous
bulk polymerization under technology of the firm
"Emejota" (USA). The product appearance
- stable granules colored or non-colored with residual
monomer content in accordance with European standards.
GPPS of continuous bulk polymerization has a number
of properties ( transparency, heat-resistance, dielectric
properties, etc) that surpass similar characteristics
of suspension polystyrene.
The bulk polymerization GPPS manufacture does not
produce waste waters that are inherent to suspension
process and therefore the production is of high
ecological safety.
The GPPS is allowed to be used for items being in
contact to food products (tare, package) and toys
by the RF Healthcare Ministry.
Depending on properties and specific purpose the
following types of GPPS are produced:
PSM-111 - polystyrene of enhanced light-resistance.
May be used for injection molded illumination appliances,
consumer goods.
PSM-115 - polystyrene of middle viscosity. May be
used for injection molded items - household goods,
package, containers, reservoir, transparent and
non-transparent casings, audio-video casettes, disposable
dishware, medical items (Petri dish, test tubes,
bulbs), toys etc.
PSM-118 - polystyrene of low viscosity. May be used
for complex configuration injection molded parts
and consumer goods.
PSM-151 - polystyrene
of high heat resistance and high viscosity. May
be used for sheets, profiles, films, threads, and
other items being extruded and injection molded
- interior vitrification, decorative partitions,
protecting picture covers, interior advertisement,
trade and exhibition equipment, dielectric films,
polymer light guides, package, containers, reservoirs,
transparent and non-transparent casings, audio-video
casettes, disposable dishware, medical items, toys
etc.
PSM-158 - polystyrene of high heat resistance and
mechanical strength. May be used for plates, sheets
and films production by XPS extrusion
PRODUCTION
OF PLASTYREN
The impact resistant polystyrene produced by continuous
bulk polymerization under technology of the firm
"Emejota" (USA). The product is produced
as stable granules colored or non-colored that are
copolymer of styrene with polybutadiene. Our technology
provides high uniformity of the material without
any gel formations and with low content of residual
monomer in accordance with European standards requirements.
Being produced without waist waters formation the
impact resistant polystyrene production is of high
ecological safety.
The GPPS is allowed to be used for items being in
contact to food products (tare, package) and toys
by the RF Healthcare Ministry.
The HIPS is allowed to be used for items being in
contact to food products (tare, package) by the
RF Healthcare Ministry. The product meets high sanitary
requirements and is widely used in sanitary engineeriong.
Depending on properties and specific purpose the
following types of impact resistant polystyrene
are produced:
Plastyren 435 - is usually used for thermoformed
food packagings, eg.dairy - and vending cups, ice
cream-containers, food service disposables.
Plastyren 525 - is usually used for Vacuum cleaner
housings; toilet flush; telephones; air conditioner
housings; toys; Coextruded gloss layer.
Plastyren 630 F - is usually used for TV-cabinets
and back covers. Housings and internal parts (f.e.
chassis) for consumer electronics (VCR, radio, CD-player
a.s.o.)
Plastyren 1040 - 1040 is usually used for consumer
electronics: TV-front and back; chassis fur VCR
and CD player. Household: internal parts of vacuum
cleaners; refrigerator parts; drawers Audio- and
video cassettes; printer housings, keyboards, computers,
copier parts.
Plastyren 1430 EF - is intended primarily for mouldings
used in the manufacture of electrical appliances,
such as cases and their components. Housings of
small distribution boards are made of this grade.
Plastyren 1535 - is usually used for Thinwall injection
molding; ice cream container, household and office
articles.
Plastyren 1540 - is usually used for TV-front panels
and back covers, VCR fronts, internal parts for
refrigerators, office and household articles.
Plastyren 2630 - can be used for office, kitchen
and bathroom articles.
PRODUCTION
OF PLASTYPOR
The expandable polystyrene with treatment of particles
surface is produced by a suspension polymerization
method in the presence of a blowing agent under
technology of the firm "Phojil" (France).
The product has appearance of spherical particles
(beads), with surface of the beads being treated
by various substances that enhances process properties
of the material under treatment and gives to the
material new features. The technology used provides
the beads to be of stable size, strict granulometric
composition and does not require an additional operation
- screening the product by fractions.
The EPS is allowed to be used for items being in
contact to food, cosmetic and medical products (disposal
dishware, tare, package) by the RF Healthcare Ministry
The EPS is used:
? In production of cellular polystyrene blocks and
plates of various configuration for heat and noise
insulation of buildings and compartments of any
destination (walls, roofs, floor, warehouses, pavilions,
dwellings, garages, basements etc.)
In producing complex package for various appliances,
that need to be protected at transportation.
In producing automobile parts, floating means, decorative
parts of interior.
To produce polystyrene-concrete - light concrete
with binding cement and expanded polystyrene filler.
It may be used for heat insulating blocks and plates,
monolithic heat-insulation of attics, roofs, floors,
outer walls etc.
To produce cellular polystyrene gasified models
for metal casting. There is a set of special additives
that enhance melting gasification speeds of the
models. Uniform granulometric composition of the
polymer provides equidensity of the polystyrene
models and its smooth surface. The surface of the
model being treated provides high surface quality
of the metal castings.
AKTAU PLASTICS
PLANT
